YTMX580 Multi-Input Temperature Transmitter

YTMX580 can accept inputs from up to 8 points of measurement such as thermocouples (8 types: K, E, J, etc.) or RTD signals (3 types: Pt100, etc.), converting the corresponding measurement input values to a wireless signal. It can also accept DC voltage, resistance, and 4 to 20 mA DC signal input.1

• Easy Setup: Field Wireless

• Cut back on troublesome wiring, reducing setup costs.

• Traditional wired connections can easily be switched to a wireless solution.

• ISA100.11a International Wireless Communication Standard2

• Advanced encryption maintains communication security.

• Multi-vendor communication supports transmitters from a variety of manufacturers.

• Reliable, Fast, 8-ch Multipoint Measurements

• 8 ch universal input: Perfect for multipoint measurement applications.

• High performance measurements with intervals as fast as 1 sec (3 ch), or 2 sec (8 ch).

• Superb environmental tolerance:
  Operating temperature of -40 to 85°C
  (-40 to 185°F)3;
  Protection level of IP66/IP67 & NEMA 4X.

• Explosion protection

• FM, CSA: Intrinsically safe Approval, non-incendive (Class I) Approval

• ATEX, IECEx: Intrinsically safe Approval

• TIIS: Intrinsically safe Approval (pending)

• Easy Battery Maintenance

• Typical battery life is 6 years (measuring at 60 seconds intervals).

• Battery packs can be swapped even in hazardous areas.

• Supporting Plant Wide Field Wireless

• Full Redundancy(Duplicate, Duocast)

• 4hops

• Remote Antenna + Extension cable

1. Does not support explosion proof standards for 4 to 20 mA DC signal input.

2. Industrial wireless communication standard from the International Society of Automation (ISA).

3. TIIS: –20 to 60°C
   FM, CSA, ATEX, IECEx: –50 to 70°C