YTA510 Wireless Temperature Transmitter
The high performance temperature transmitter YTA510 accepts Thermocouple, RTD, ohms or DC mill volt inputs. The transmitters transmit not only process variables but also the setting parameters using wireless signal. The transmitters run on internal batteries, and the installation cost can be decreased since hard-wiring is not required. The communication is based on ISA100.11a protocol specifications.Detachable Antenna type model can be used with a high-gain antenna*1 with an extension cable. Ultra low current consumption design provides wireless operation for years with long life battery.
Description：
The high performance temperature transmitter YTA510 accepts Thermocouple, RTD, ohms or DC mill volt inputs. The transmitters transmit not only process variables but also the setting parameters using wireless signal. The transmitters run on internal batteries, and the installation cost can be decreased since hard-wiring is not required. The communication is based on ISA100.11a protocol specifications.Detachable Antenna type model can be used with a high-gain antenna*1 with an extension cable. Ultra low current consumption design provides wireless operation for years with long life battery.
| Wireless Specifications | Communication protocol | ISA100.11a / IEEE802.15.4 |
|---|---|---|
| Data rate | 250 kbps | |
| Frequency | 2.400 - 2.4835 GHz license free ISM band | |
| Radio security | AES 128 bit codified | |
| RF Transmitter power | Max. 11.6 dBm (fixed) | |
| Antenna | +2 dBi Omni directional Detachable Antenna type model (Amplifier housing code 8 or 9) can be used with a high-gain antenna1 with an extension cable. | |
| Standard Specifications | Variety of sensor inputs | Single input: Amplifier housing code 7 Dual input: Amplifier housing code 8or9 RTD: Pt100 & Pt200 & Pt500 (IEC) and ohms Thermocouples (T/C): B, E, J, K, N, R, S, T(IEC) and DC m volts (-10 to 110 mV) Input type is selectable: Thermocouples, 2-,3-, and 4-Wire RTDs, ohms and DC milivolts. 4-Wire is available for Sensor 1 input. |
| A/D accuracy | Pt100: ±0.3°C Type k: ±1°C | |
| CJC accuracy (T/C only) | ±0.5°C | |
| Update period | 1 sec to 60 min selectable | |
| Battery life | Typical battery life is 10 years at 10 seconds update time or 8 years at 5 seconds update time in the following conditions.2 Detachable Antenna type model (Amplifier housing code 8 or 9) low power mode Ambient temperature: 23±2°C Device role: IO mode LCD display: off | |
| Physical Specifications | Antenna | +2 dBi Omni directional monopole type |
| Weight | 2.8kg（Without battery pack and mounting bracket） | |
| Enclosure | IP66/IP67, NEMA4X | |
| Power supply | Lithium thionyl chloride batteries (size D×2) | |
| Battery Replacing | Included zone 0 | |
| Certification | Explosion protected type | ATEX, FM, CSA, IECEx Intrinsically safe Approval |
| EMC Conformity Standards | EN61326-1 Class A, Table 2 (For use in industrial locations), EN61326-2-3 | |
| R&TTE Conformity Standards | ETSI EN 300 328, ETSI EN 301 489-1, ETSI EN 301 489-17, EN61010-1, EN61010-2-030, EN62311 | |
| Regulation Conformity of the Wireless Module | • FCC Approval • IC Approval | |
| Safety Requirement Standards | EN61010-1, EN61010-2-030 | |
| Others | Ambient temperature | -40 to 85°C |
Browse：
On A：YTMX580 Multi-Input Temperature Transmitter
Next：No
