SC25F Digital SENCOM® pH 12 mm Sensor with Build-in Temperature and External Liquid Earth
The SC25F is Yokogawa's first 12mm combination design digital smart pH sensor. It includes an integral temperature element and a Liquid earth electrode. This design provides a large electrolyte volume giving the sensor longer life than most comparable pH electrodes.
The SC25F is Yokogawa's first 12mm combination design digital smart pH sensor. It includes an integral temperature element and a Liquid earth electrode. This design provides a large electrolyte volume giving the sensor longer life than most comparable pH electrodes.
Solid Titanium LE electrode for stable measurements
Integral Pt1000 element for enhanced pH accuracy
Versatile in-line, immersion or off-line installation
CIP and Steam cleaning possible
large internal KCL volume giving the sensor a longer life time
low conductivity applications possible from 10µS
SC25F-ALP25 for chemically harsh applications and high temperature
SC25F-AGP25 for all General Purpose applications
Easy setup by sensor specific characteristics stored in the sensor itself
Simple maintenance by comprehensive design
CE, ATEX, CSA and FM Approval. However *Can only be used General Purpose at this time, because FLXA21 SENCOM® module and SPS24 Interface box are pending ICECx, ATEX, FM and CSA approval*
WU11 Connection Cable
The WU11 interconnection cable is specified for reliable transfer of digital signals between the SENCOM® sensors and Yokogawa FLXA analyzer. It is espically designed to be installed in a heavy industrial environment. The cable is water proof, IP67, allowing it to be submerged as a whole. The cable has a wide temperature operation range which is sufficient for most of the applications. The materials used for the cable are flame retardant to resist the spread of fire.
Double shielding to protect connected devices for interference from high voltages and currents
Available in four different lengths. Long cable runs up to 100 m (328 ft) are possible
Easy connection to a SENCOM pH Sensor by one 5- pins molded connector, and to the analyzer by 5 wired pins
Flame retardant recognized by UL (fileno. E124763) and CSA (fileno. LL105324)
IP67
Operating temperature from - 40ºC up to + 85°C (-40ºF up to +185°F)