Welcome to Fink International Trading (Hongkong) Co., Ltd.!

Sensor Holders for pH/ORP, DO and MLSS Analyzers

Yokogawa provides several types of holders, for which cleaners can be added, allowing customers to build reliable and easy-to-maintain measuring systems by selecting the right holders and cleaners for the conditions of applications.

The submersion type holders PH8HS, PH8HSF and DOX8HS are widely used with process analyzers and can be directly immersed in reaction tanks or measuring baths for measurement.

The flow-through type holders PH8HF, PH8HFF and FH350G can be set up at a point along pipelines to measure solvent in production lines or wastewater pipelines.

The suspension holder HH350G has a guide pipe along which just a fitting mounted electrode can be separately pulled up with a chain, thus increasing the ease of maintenance.

The inclined float holder, PB350G is equipped with a float that moves up and down in accordance with the fluctuating water surface level. Since the float has been designed to accommodate an electrode without extreme projections and depressions, the amount of foreign matter building up around the float or electrode decreases, and it becomes harder for dirt to accumulate, thus enabling continuous stable measurement over a long period.

We have provided the vertical float holder, PB360G, for cases when the installation space for a float holder is limited or the measuring bath is covered.



Description:

Yokogawa provides several types of holders, for which cleaners can be added, allowing customers to build reliable and easy-to-maintain measuring systems by selecting the right holders and cleaners for the conditions of applications.

The submersion type holders PH8HS, PH8HSF and DOX8HS are widely used with process analyzers and can be directly immersed in reaction tanks or measuring baths for measurement.

The flow-through type holders PH8HF, PH8HFF and FH350G can be set up at a point along pipelines to measure solvent in production lines or wastewater pipelines.

The suspension holder HH350G has a guide pipe along which just a fitting mounted electrode can be separately pulled up with a chain, thus increasing the ease of maintenance.

The inclined float holder, PB350G is equipped with a float that moves up and down in accordance with the fluctuating water surface level. Since the float has been designed to accommodate an electrode without extreme projections and depressions, the amount of foreign matter building up around the float or electrode decreases, and it becomes harder for dirt to accumulate, thus enabling continuous stable measurement over a long period.

We have provided the vertical float holder, PB360G, for cases when the installation space for a float holder is limited or the measuring bath is covered.

Submersion Type Holders: PH8HS, PH8HSF and DOX8HS

  • Available in stainless steel or polypropylene.

  • Optional jet- or ultrasonic-cleaning device (unavailable for DOX8HS).

  • Optional flange fitting for PH8HS.

  • Skewed mounting for DOX8HS to prevent influence from bubbles.

Flow-Through Type Holders: PH8HF, PH8HFF and FH350G

  • Available in stainless steel or polypropylene.

  • Optional jet- or ultrasonic-cleaning device (unavailable for FH350G).

  • Allows direct mounting to the pipeline.

Suspension Holder: HH350G

  • Allows the electrode to be pulled up separately.

  • Easy maintenance.

  • Optional jet-cleaning device.

Float Ball Holders: PB350G and PB360G

  • Continuous stable measurement without effect from fluctuations in fluid level.

  • Reduces maintenance frequency.

  • Easy-to-maintain.

  • Vertical type is also available for limited installation space.

1. Guide-Pipe PH8HG

Applicable sensorsGeneral pH Sensor PH8ERP, PH8EFP
General ORP Sensor OR8ERG, OR8EFG
Dissolved Oxygen Sensor DO30G
MLSS Sensor SS300G
Mounting2-inch pipe mounting vertical or horizontal
MaterialHolderPolypropylene or PVCMounting bracketGalvanized iron or stainless steel (equivalent to 304SS)
Measuring temperature0 to 50℃ (PVC), 0 to 80℃ (Polypropylene)
WeightHolderApprox. 2 kgMounting bracketApprox. 1 kg/set

 

2-A. Submersion Type Holder PH8HS

Applicable sensorsGeneral pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG
Special pH Sensor HA405, DPA405, HF405
General ORP Sensor OR8ERG, OR8EFG
Special ORP Sensor HA485, DPA485
Mounting2-inch pipe mounting vertical or horizontal with 1 or 2 set of mounting hardware
Cleaning methodJet cleaning, brush cleaning or ultrasonic cleaning
MaterialHolderPolypropylene or stainless steel (equivalent to 316SS)Mounting bracketGalvanized iron or stainless steel (equivalent to 304SS)
WeightHolderApprox. 0.5 to 2.2 kg (polypropylene),Approx. 1.5 to 11.5 kg (stainless steel)Mounting bracketApprox. 1 kg/set
Measuring temperatureNo Cleaning-5 to 100℃With Cleaning-5 to 80℃
Measuring flow speed2m/s or less
Measuring pressureSubmersion depth Max. 3m

 

2-B. Submersion Type Holder (Explosionproof Type) PH8HSF

Applicable sensorsGeneral pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG
General ORP Sensor OR8ERG, OR8EFG
Mounting2-inch pipe mounting vertical or horizontal with 1 or 2 set of mounting hardware
Cleaning methodUltrasonic cleaning
MaterialHolderPolypropylene or stainless steel(equivalent to 316SS)Mounting bracketGalvanized iron or stainless steel (equivalent to 304SS)
ConstructionJIS flameproof type (for d2G4 gas)
WeightHolderApprox. 0.5 to 2.2 kg (polypropylene), Approx. 1.5 to 11.5 kg (stainless steel)Mounting bracketApprox. 1 kg/set
Measuring temperature-5 to 80℃
Measuring flow speed2m/s or less
Measuring pressureSubmersion depth Max. 3m

 

2-C. Submersion Type Holder DOX8HS

Applicable sensorsDissolved Oxygen Sensor DO30G
MLSS Sensor SS300G
Mounting2-inch pipe mounting vertical or horizontal, with 1 or 2 set of mounting hardware
Cleaning methodWater or air jet cleaning
MaterialHolderPolypropylene or stainless steel equivalent to 316SS)Mounting bracketStainless steel (equivalent to 316SS) or galvanized iron
WeightHolderApprox. 0.5 to 1.5 kg (polypropylene), Approx. 1.5 to 11.5 kg (stainless steel)Mounting bracketApprox. 1 kg/set
Measuring temperature0 to 80℃
Measuring flow speed2 m/s or less.

 

3-A. Flow-Through Type Holder PH8HF

Applicable sensorsGeneral pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG
Special pH Sensor HA405, DPA405, HF405
General ORP Sensor OR8ERG, OR8EFG
Special ORP Sensor HA485, DPA485
Mounting2-inch pipe mounting vertical or horizontal, with 1 set of mounting hard hardware
Cleaning methodJet cleaning, brush cleaning or ultrasonic cleaning
MaterialHolderPolypropylene or stainless steel(equivalent to 316SS)Mounting bracketStainless steel (equivalent to 304SS)
WeightHolderApprox. 0.5 to 1.5 kg (polypropylene), Approx. 1.5 to 11.5 kg (stainless steel)Mounting bracketApprox. 0.5 kg
Measuring TemperatureNo Cleaning-5 to 80℃ (polypropylene)-5 to 105℃ (stainless steel)With Cleaning-5 to 80℃
Measuring flow rate3 to 11 l/min.
Measuring pressureAtmospheric pressure to 500kPa.

 

3-B. Flow-Through Type Holder (Explosionproof Type) PH8HFF

Applicable sensorsGeneral pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG
General ORP Sensor OR8ERG, OR8EFG
Mounting2-inch pipe mounting vertical or horizontal, with 1 set of mounting hardware
Cleaning methodUltrasonic cleaning
MaterialHolderPolypropylene or stainless steel(equivalent to 316SS)Mounting bracketStainless steel (equivalent to 304SS)
ConstructionJIS flameproof type (for d2G4 gas)
Cable entrance port of terminal box; G 3/4
WeightHolderApprox. 3 to 3.2 kg (polypropylene),Approx. 5.6 to 7.6 kg (stainless steel)Mounting bracketApprox. 0.5 kg
Measuring temperature-5 to 80℃
Measuring flow rate3 to 11 l/min
Measuring pressureAtmospheric pressure to 500kPa

 

3-C. Flow-Through Type Holder FH350G

Applicable sensorMLSS Sensor SS300G
Mounting2-inch pipe mounting vertical or horizontal
Cleaning methodWater or air jet cleaning
MaterialHolderPolypropylene or stainless steel(equivalent to 316SS)Mounting bracketStainless steel (equivalent to 304SS)
WeightHolderApprox. 0.4 to 5 kgMounting bracketApprox. 0.5 kgt
Measuring temperature0 to 80℃
Measuring flow rate6 to 11 l/min

 

4. Suspension Holder HH350G

Applicable sensorsGeneral pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG
General ORP Sensor OR8ERG, OR8EFG
Dissolved Oxygen Sensor DO30G
MLSS Sensor SS300G
Mounting2-inch pipe mounting vertical.
Cleaning methodWater or air jet cleaning
MaterialHolderPolypropylene and stainless steel (equivalent to 304SS)Mounting bracketStainless steel (equivalent to 304SS)
Weight6.4 to 13.8 kg
Measuring temperature0 to 80℃
Measuring flow speed1 m/s or less

 

5. Angled Floating Ball Holder PB350G

Applicable sensorsGeneral pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG
General ORP Sensor OR8ERG, OR8EFG
Dissolved Oxygen Sensor DO30G
MLSS Sensor SS300G
Pipe length2.5m
Mounting2-inch pipe horizontal mounting or horizontal plane mounting
MaterialHolderABS resin, Nitrile rubber (NBR), brass, and PVCMounting bracketStainless steel (equivalent to 304SS)
WeightHolder(incl.arm)Approx. 4.8 kg to Approx. 5.4 kgMounting bracketApprox. 5 kg
Measuring temperature0 to 50℃
Measuring flow speed20 to 100 cm/s

 

6. Vertical Floating Ball Holder PB360G

Applicable sensorsGeneral pH Sensor PH8ERP, PH8EFP, PH8ERG, PH8EFG
General ORP Sensor OR8ERG, OR8EFG
Dissolved Oxygen Sensor DO30G
MLSS Sensor SS300G
Mounting2-inch pipe vertical mounting
MaterialHolderABS resin, brass, and rigid PVCMounting bracketStainless steel (equivalent to 304SS)
WeightHolder, guide-pipe, and armApprox. 7.4 kg to Approx. 9.6 kgMounting bracket including assist bracket and U-bolt assemblyApprox. 5 kg
Measuring temperature0 to 50℃
Measuring flow speed20 to 100 cm/s


Looking for more information on our people, technology and solutions?

Browse:
Return To The Top

分享到: